Feature:
>> Fiber amount: 2,4,6,8 and 12 fibers
>> Fiber type: G.G652D, G.657A1 and G.657A2
>> Small diameter, stable structure, good mechanical and temperature performance
>> Designed with special grooves to advance blowing distance..
>> Frees up capital to expand network and client base
>> Network design flexibility
>> Designed with no gel, easy stripping and handling.
>> Complete accessories, less manpower, lower installation time.
Standards:
>> Unless otherwise specified in this specification, all requirements shall be mainly in accordance with the following standard specifications.
>> Optical fiber: ITU-T G.651,G.652,G.655,G.657 IEC 60793-2-10,IEC 60793-2-50
>> Optical Cable: IEC 60794-1-2,IEC 60794-5
Specification:
| Fibre Count | 2 Fibres | 4 Fibres | 6 Fibres | 8 Fibres | 12 Fibres |
| Outer Diameter (mm) | 1.15±0.05 | 1.15±0.05 | 1.35±0.05 | 1.50±0.05 | 1.65±0.05 |
| Weight (g/m) | 1 | 1 | 1.3 | 1.8 | 2.2 |
| Min Bend radius (mm) | 50 | 50 | 60 | 80 | 80 |
| Temperature | Storage: -30ºC ~ +70ºC |
| Operation: -30ºC ~ +70ºC |
| Installation: -5ºC ~ +50ºC |
| Cable service life (estimate value) | 25 years |
| Note: It is recommended that the structure of 2 fibres unit consist of 2 filled fibres, for it is proved that 2 fibres unit with 2 filled fibres is better than the one with zero or one filled fibre in the blowing performance and the fibre stripping-ability. |
| Fibre Count | 2 Fibres | 4 Fibres | 6 Fibres | 8 Fibres | 12 Fibres |
| Test equipment | PLUMETTAZ:UM25, ERICSSON:F, CATWAY:FBT-1.1 |
| Standard duct | 5.0/3.5 mm |
| Pressure | 7bar / 10bar |
| Typical blowing distance | 500m / 1000 m | 500m / 1000m | 500m / 1000m | 500m / 1000m | 500m / 800m |
| Typical blowing time | 10 min/18 min | 10 min18 min | 12 min/ 18 min | 13min/18 min | 15 min /20 min |
| Test | Standard | Parameters | Test Results |
| Tension | EN 18700 A1/501 | Load is 1×W | Additional attenuation ≤0.05dB after test |
| IEC 60794-1-2-E1 |
| Bend | IEC 60794-1-2--E11A | Diam 40mm×3turns 5 cycles at 20ºC | Additional attenuation ≤0.05dB,after test |
| Crush | IEC 60794-1-2-E3 | 100 N, 60s | Additional attenuation ≤0.05dB,after test |
| All optical testing proceeded at 1550 nm |
Packing information:
Standard delivery lengths are: 1000m, 2000m, 4000m, with a tolerance of 0~+5%.
| Fibre Count | Length(m) | Pan Size Φ×H(mm) | Weight (Gross) (kg) |
| 2~4 Fibres | 2000 m | φ510 × 200 | 8 |
| 4000 m | φ510 × 200 | 10 |
| 6000m | φ510 × 300 | 13 |
| 6 Fibres | 2000 m | φ510 × 200 | 9 |
| 4000 m | φ510 × 300 | 12 |
| 8 Fibres | 2000 m | φ510 × 200 | 9 |
| 4000 m | φ510 × 300 | 14 |
| 12 Fibres | 1000 m | φ510 × 200 | 8 |
| 2000 m | φ510 × 200 | 10 |
| 3000m | φ510 × 300 | 14 |
| 4000 m | φ510 × 300 | 15 |
Optical fiber color:
